Equipment (Modems,Gateways)
Modems, Gateways, and Networking Devices
Male IT Specialist Holds Laptop and Discusses Work with Female Server Technician. They're Standing in Data Center, Rack Server Cabinet is Open.
Highlighted
New Member

SMC Networks in Psuedo Bridge Mode with ASUS RT-AC68U

I have been trying to setup our Comcast Business router with the AUS RT-AC68U wireless router and I want to control everything with the ASUS.   I have been told that I cannot put Comcast in total bridge mode because of the 5 static ip addressess that we own.   So I dummy down the Comcast router as much as I can by doing the following:

-Turn Off DHCP

-Turn Off DNS

-Disable  Firewall for True Static IP Subnet Only

-Disable Gateway Smart Packet Detection

 

Is there anything else that I should be doing for this to work?

0 Kudos
Reply
1 REPLY 1
Official Employee

Re: SMC Networks in Psuedo Bridge Mode with ASUS RT-AC68U

Hi gwright01 and welcome to the business forums. 

 

Thanks for reaching out in regard to your gateway configuration. I'll be glad to assist. I would recommend using passthrough mode since you have static IP addresses. Please see the following thread:

https://forums.businesshelp.comcast.com/t5/Equipment-Modems-Gateways/True-Bridge-Mode-vs-Pass-Throug....

 

Passthrough mode describes a modem which has its LAN DHCP and Firewall manually disabled through the user interface. This allows traffic to passthrough the modem to a routing device and can be used if the customer has a Static IP address. This is not true Bridge Mode and does not convert the gateway to a basic cable modem. This mode allows most of the routing capabilities of the gateway to remain intact.

 

Please let me know if you need anything else. 

0 Kudos
Reply