My SMC router/cable modem stops handling DHCP every few weeks and I usually log in to it over HTTP and verify that that is the problem, and reboot it. Today when I rebooted it, I found I was unable to log in with the username and password. I rebooted it again (power cycle) and it's still the same. How can I get it fixed?
Welcome to the forum.
I've check the status of the SMC IP-Gateway and reverted the customer admin password back to default.
Please power cycle your network and try connecting to the internet, after the test try log into the IPGW.
Please tell us of your issue's status, we are here to help
Thank you, you fixed it! I am able to log in! I do not know how the password got changed, but I suspect I must have pressed submit on the wrong screen of the SMC management web ui.
At some point I would like to replace this SMC device with an SB6141 and I will watch your http://mydeviceinfo.comcast.net/ for 6141 qualification.
Glad to be a help.
In respect to your interest of SB6141: yes, please continue to check for its qualification within Comcast.
Please continue to post technical support questions and concerns you have in this forum.
Cherrychum, Welcome to the Business Forum. The password for the SMC gateway has been reset the the default password. Let us know if you need further assistance with this.
Can someon help with with this problem ON my Static Ip address I have the DNS of 68. and they work just fine but the DNS that was on the modem quit working last night and Lost intenet to all my computer but not the servers. So I reset the modem and know I can not login to the modem Not sure what happend I was able to login just fine before this happend. I never changed anything.
Welcome to the forum and thank you for posting.
I've checked the status of the SMC IP-Gateway and corrected customer admin password back to default.
Please attempt to login.
Additionally regarding DNS address of : ( 188.8.131.52 / 184.108.40.206) it is our national DNS assigned to our IPGWs, as "68" was.
I was able to login so I dont understand about the DNS why did it do that when I reset the modem and kicked me off of it. is it ok to use the 68. DNS
When our IPGWs are reset, it reaches out to our network for new updates.
“If” there is one, appropriately our IPGW will receive it causing the PW to revert to default.
Regarding “68” DNS: yes, you can use it; however, we are phasing out our old DNS servers (including 68).
In that respect I do recommend using “75”, which is our national DNS servers.
Last night my gateway was reset. I'm guessing it was a FW update. At any rate, my password has been reset, but NOT to the default login that I used originally or to the one in the Business Class manual. I can't log in.
I seem to be affected by this same problem, I suddenly can't login to my SMC Gateway any more. I urgently need to access it, can you reset my gateway's username/password as well? Thanks!
Comcast_John, my SMCD3G router's cusadmin password is no longer working so I can't manage its MAC list. Would you reset it for my account also?
Rick_G, Welcome to the Business Forum. The password for the SMC gateway has been reset the the default password. Let us know if we can be of further assistance.
Hi, just found this thread and hope it is the answer. Cannot login to my gateway and the references to resetting to default don't help. We have no documentation with this device so I have no idea what the default was! I have a password scribbled on the install order but no user id. The gateway of 10.1.10.1 brings up the signin screen but I'm stopped there. Can you help?
Welcome to the Business Forum. The password for the SMC gateway has been reset the the default password. Let us know if we can be of further assistance.
Our gateway reset last night, and this morning we were unable to login to administrate it. Can we also get our gateway reset?
Thanks in advance!
Bryanb426, Welcome to the Business Forum. The password for the SMC gateway has been reset the the default password. Let us know if we can be of further assistance.
I'm having the same issue logging in. Can you please reset my SMC router/cable modem's password to the factory default?
I have tried cusadmin / highspeed and it does not work. I've tried holding down the reset button on the router, but still cannot log in.