Skip to content
bacnguye's profile

New Member

 • 

3 Messages

Fri, Mar 20, 2015 12:00 PM

How to change to DOCSYS3.0?

I have the Teleworker Business acoount with the Cable Modem:

 

Hardware Information

System: ARRIS DOCSIS 3.0 Touchstone WideBand Cable Modem
HW_REV: 3
VENDOR: Arris Interactive, L.L.C.
BOOTR: 1.2.1.25
SW_REV: 7.6.59M
MODEL: WBM760A
Serial Number: A7BBPC47B316900
EMAC
CMAC 0015D1873EA2
0015D1873EA3
Options:
Firmware Build and Revisions
Firmware Name: TS070659M_092613_WBM760_CM820
Firmware Build Time: Thu Sep 26 19:17:40 EDT 2013
© Copyright 2013, ARRIS Group, Inc., All rights reserved.

But only see the DOCSYS2.0:

 

RF Parameters
Downstream
DCID Freq Power SNR Modulation Octets Correcteds Uncorrectables
Downstream 1 2 567.00 MHz -9.50 dBmV 35.25 dB 256QAM 33387068 131 0
Downstream 2 8 603.00 MHz -10.88 dBmV 35.25 dB 256QAM 30957951 116 655
Downstream 3 10 615.00 MHz -10.70 dBmV 35.60 dB 256QAM 30241266 82 0
Downstream 4 16 651.00 MHz -11.55 dBmV 34.08 dB 256QAM 27662457 131 0
Reset FEC Counters


Upstream
UCID Freq Power Channel Type Symbol Rate Modulation

Upstream 1 3 30.10 MHz 43.00 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM
Upstream 2 1 18.90 MHz 41.50 dBmV DOCSIS2.0 (ATDMA) 2560 kSym/s 64QAM
Upstream 3 2 23.70 MHz 42.25 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM
Upstream 4 4 36.50 MHz 43.25 dBmV DOCSIS2.0 (ATDMA) 5120 kSym/s 64QAM

Status
System Uptime: 0 d: 1 h: 09 m
Computers Detected: staticCPE(0), dynamicCPE(1)
CM Status: OPERATIONAL
Time and Date: Fri 2015-03-20 10:44:26

Interface Parameters
Interface Name Provisioned State Speed (Mbps) MAC address
LAN Enabled Up 1000(Full) 00:15:D1:87:3E:A2
CABLE Enabled Up ----- 00:15:D1:87:3E:A3
© Copyright 2013, ARRIS Group, Inc., All rights reserved.

Responses

Trusted Forum Contributor

 • 

1.4K Messages

6 years ago

Hello bacnguye and welcome,

 

One way for you to get your modem upgraded to DOCSIS 3.0 is to have your Internet Tier speed @ 50 Mbps down / 10 Mbps up because your DOCSIS 2.0 will not handle that speed.

 

Hope this helps you out.

 

 

New Member

 • 

3 Messages

6 years ago

I am already a Teleworker Business account with Comcast Business as mentioned below.

Does this mean Comcast Business is cheating??

 

Fast Speeds

Get presentations and other large files transferred and relayed quickly and easily. Comcast Enterprise Internet solutions offer:

 

   Speed up to 30x faster than DSL

   Download files at up to 50Mbps

   Uploads up to 10Mbps

 

Thanks,

Gold Problem solver

 • 

610 Messages

6 years ago

So if you truly do have the Arris WBM760A, then it is already a DOCSIS 3.0 device. Here is a link on the official Comcast site for it:

 

http://mydeviceinfo.comcast.net/device.php?devid=225

 

Additionally, if you see multiple channels on either the downstream or upstream signals, then this means that DOCSIS 3.0 is currently working; DOCSIS 2.0 is NOT able to use more than 1 channel down and 1 channel up. At the moment, your modem is using 4 channels down and 4 channels up.

 

Are you currently having problems?

New Member

 • 

3 Messages

6 years ago

Thanks, I just want to make sure that my modem is really working as DOCSYS3.0.

 

Some of my friends get the new DOCSYS3.0 and their Download speed is 60.11Mb/s

 

3/17/2015 6:54 PM GMT98.207.54.17060.11 Mb/s6.08 Mb/s10 msSan Francisco, CA~ 50 miSh

 

while mine is only 21.40Mb/s

 

 

 Share Image

Gold Problem solver

 • 

610 Messages

6 years ago

So based on the signal levels posted above, your downstream power is lower than ideal; it should normally between -7 and +7, with maximum swings of -10 to +10. One of the channels you show is at -11. Make sure that when you do the speedtest, you have a computer connected with ethernet directly into the modem, bypassing any routers or other equipment you may have.

 

After that, you should try calling in to support, or optionally sending an IM to one of the red "Comcast_" users on this forum. In the meantime, you could possibly try tightening the coax cable on the back of the modem, as well as going into the wall, as loose connections can occasionally cause signal loss.

Trusted Forum Contributor

 • 

1.4K Messages

6 years ago

Could you please let us know what the Business Class Internet speed that it says you have on your billing statement. Most Teleworker Companies usually provide Business Class Starter Internet which is 16 Mbps down / 3 Mbsp up minimum as measured directly connected to the Comcast modem.

 

Look forward to hearing from you.