IPV6
Back to Top

Do I have static IPv6 addresses?

SOLVED
Highlighted
StarNet
Contributor

Do I have static IPv6 addresses?

For the first time, I logged into my Comcast Business account, went to the "Manage Services", "Internet", page, and noticed a link to "View Static IP", so I clicked on it.

It brings up a page that not only shows the static IPv4 addresses I know very well, but also "Static IPv6 Information", which is a "/56" address that starts with "2603:3024:".

Are these address really static? Can I depend on them not changing when our modem loses power?

And, also important, will Comcast make a PTR record with these addresses?

Accepted Solution

Re: Do I have static IPv6 addresses?

Yes and no.  The static IPv6 is a prefix delegation and if you have an IPv6 compliant router it can accept that prefix delegation and subsequently assign or allow you to assign static IPv6 address it devices attached to your network.

 

The caveat here is that your router is at the mercy of your cable modem in terms of which subnet(s) are assigned to it.  As of this writing, you cannot go and pick a subnet from your prefix delegation and assign it statically.  The cable modem must do the assignment.  

 

This means that you have kind of a hybrid, yes the prefix delegation won't be taken from you and changed, but it is possible for the cable modem to change which subnet has been assigned to your router.   It hasn't happened to me...yet...but because there is no provision in the cable modem to set up a static IPv6 route from your cable modem to your router, you can't pick your IPv6 subnet.

 

I imagine that once they allow us to specify IPv6 static routes on the cable modem (like they allow for IPv4) then you can pick your own subnet...until then...you have to let your router accept the assignment automatically from the cable modem.

 

'Been round and round with Comcast on this one.

 

Kevin

 

View solution in context
flyingrobots
Visitor

Re: Do I have static IPv6 addresses?

Yes and no.  The static IPv6 is a prefix delegation and if you have an IPv6 compliant router it can accept that prefix delegation and subsequently assign or allow you to assign static IPv6 address it devices attached to your network.

 

The caveat here is that your router is at the mercy of your cable modem in terms of which subnet(s) are assigned to it.  As of this writing, you cannot go and pick a subnet from your prefix delegation and assign it statically.  The cable modem must do the assignment.  

 

This means that you have kind of a hybrid, yes the prefix delegation won't be taken from you and changed, but it is possible for the cable modem to change which subnet has been assigned to your router.   It hasn't happened to me...yet...but because there is no provision in the cable modem to set up a static IPv6 route from your cable modem to your router, you can't pick your IPv6 subnet.

 

I imagine that once they allow us to specify IPv6 static routes on the cable modem (like they allow for IPv4) then you can pick your own subnet...until then...you have to let your router accept the assignment automatically from the cable modem.

 

'Been round and round with Comcast on this one.

 

Kevin

 

Discussion stats
  • 1 reply
  • 1050 views
  • 0 kudos
  • 2 in conversation